DECTRIS SELUN - Ultra-fast hybrid-pixel detector for most challenging synchrotron aplications

Testimonial

„We tested a prototype of the SELUN detector at beamline P10 of PETRA III performing XPCS in USAXS geometry, and have been impressed not only by the performance of the detector especially with respect to it’s framing rate, but also by the simplicity of the integration into the workflow of the beamline.”

- Fabian Westermeier, P10, DESY

SELUN’s standout feature is the continuous frame rate of 120 kHz with a duty cycle of >98.8%. This can be achieved through on-chip 2x2 pixel binning in combination with a novel in-pixel compression scheme. The detector features a continuous 190x190 pixel matrix with a 100 µm pixel pitch and is compatible with both silicon and highZ sensors to provide optimal quantum efficiency, both at low (8-25 keV) and high (10-80 keV) photon energies.

Its ultra-fast front end with DECTRIS Instant Retrigger® technology enables photon counting at exceptional rates exceeding 4.5 G ph/s/mm², independent of the frame rate: Resolve weak and strong signals simultaneously, with zero noise contribution, single pixel spatial resolution, and maximum detection efficiency.

SELUN is ideal for coherent scattering techniques such as Ptychography, Bragg Coherent Diffraction Imaging (BCDI), and X-ray Photon Correlation Spectroscopy (XPCS), in which fast, precise, and reliable measurements over hours and days are crucial for success. Its user-friendly design uses the same modern SIMPLON API controls and data interface as the widespread EIGER2 and PILATUS4 detector families, ensuring seamless integration. Expect unparalleled speed, dynamic range, and reliability at your beamline with DECTRIS SELUN®.

Fast, continuous frame rates: 120 kHz 2x2 binned, and 30 kHz full readout with a duty cycle of >98.8%.
High dynamic range, even at full speed: 4.5 G ph/s/mm².
Photon-counting data quality: No readout noise and no dark signal, for an optimal signal-to-noise ratio.
Easy to use, stable & reliable: Proven DECTRIS quality paired with expert-level technical support.

Detectors

Detector Specifications*

	SELUN	SELUN HighZ
Active area (W x H) [ mm² ]	19.0 x 19.0	19.0 x 19.0
Pixel array (W x H)	2x2 binned: 94 x 94 Full: 190 x 190	2x2 binned: 94 x 94 Full: 190 x 190
Pixel size (W x H) [ µm² ]	2x2 binned: 200 x 200 Full: 100 x 100	2x2 binned: 200 x 200 Full: 100 x 100
Count rate (max.) [ ph/s/pixel ]	2x2 binned: 1.8 x 10⁸ Full: 4.5 x 10⁷	2x2 binned: 1.8 x 10⁸ Full: 4.5 x 10⁷
Energy range [ keV ]	8-25	10-80
Frame rate (max.) [ Hz ]	2x2 binned: 120,000 Full: 30,000	2x2 binned: 120,000 Full: 30,000
Readout time	continuous readout, >98.8% duty cycle	continuous readout, >98.8% duty cycle
Image bit depth [ bits ]	32, 16	32, 16
Sensor thickness [ µm ]	450	1,500
Vacuum compatibility	yes	yes
Dimensions (W x H x D) [ mm³ ]	114 x 92 x 241.5	114 x 92 x 241.5
Weight [ kg ]	3.7	3.7
Removable window	yes	no